The spring is divided into three groups (1) according to the working characteristics, and the spring is subject to dynamic load (that is, the force is suddenly extended and retracted, many times), and when the spring is damaged, it will cause the whole mechanism to fail. example...

The selection of spring materials should be based on the nature of the load, stress state, stress size, working temperature, environmental medium, service life, requirements for conducting and magnetizing, and process...

Special-shaped springs include circlips, extension springs, and torsion springs. Generalized special-shaped springs also include serpentine springs, wave springs, rod springs and other springs with complex shapes. Special-shaped springs are basic parts with a wide range...

A spring is a mechanical part that uses elasticity to work. Generally made of spring steel. It is used to control the movement of parts, alleviate impact or vibration, store energy, measure the size of force, etc...

Mold is the main process equipment of industrial production. The development of modern industrial products and the improvement of technical level largely depend on the development level of mold industry. In recent years, automation...

1. Generally speaking, the higher the yield strength, the higher the fatigue strength...

1. Piano wire: (piano wire) is toughened with piano steel wire, which is processed by strong wire drawing to give good dimensional accuracy and good surface,...

A spring is a part that can produce greater elastic deformation under load.1. The type of spring The type of spring The type of spring The type of spring According to different loads, springs can be divided into extension springs, compression springs, torsion springs and bending springs....

In recent years, the surface finishing (finishing) treatment of springs has also been recognized by spring designers.The finishing (finishing) process is to put the spring directly into the inclined centrifugal, spiral vibrating...

A spring is a part that can produce greater elastic deformation under load.1. The type of spring The type of spring The type of spring The type of spring According to different loads, springs can be divided into extension springs, compression springs, torsion springs and bending springs....

We often use spring in our life, but because of the chemical reaction and electrochemical reaction, the contact surface of spring will be corroded to varying degrees, which will damage the spring and affect the design

Where is tension spring usually used?Whether in industrial production or in real life, tension spring is a common goal. However, what do you think of the extension spring...

Why do springs break during use? The following spring manufacturers give you a brief introduction. 1. If the mandrel is too small or the spring is used horizontally, the spring and mandrel will be worn and broken...

The heat treatment of spring is to change the internal structure of metal and alloy by heating, holding and cooling the spring, so as to change the mechanical, physical and chemical properties of materials. heat...

Where are tension springs generally used?Whether in industrial production or in real life, tension springs (tension springs) are common targets. However, how much do you know about the specific application of tension springs?