Compared with springs of ordinary materials, stainless steel springs are actually the same. Both are elastic components widely used in the mechanical and electronic industries. The spring can produce large elastic deformation when loaded, converting mechanical work or kinetic energy into deformation energy, and the deformation of the spring disappears and returns to its original shape after unloading.

​Why does the spring break during use? The following spring manufacturers give you a brief introduction.1. If the mandrel is too small or the spring is used horizontally, the spring and mandrel will wear out and break.2. When the mandrel is too small / the assembly surface is not flat / the parallelism of the positioning surfaces at both ends is poor, the spring will be compressed and twisted, and high pressure will be locally generated and broken.

​We often apply springs in our lives, but because of chemical and electrochemical reactions, the contact surfaces of the springs will be corroded to varying degrees, causing damage to the springs and affecting the performance of the equipment. How to prevent the spring from corroding in advance? Next, the spring manufacturer will provide you with the following methods.

Where are tension springs generally used?Whether in industrial production or in real life, tension springs (tension springs) are common targets. However, how much do you know about the specific application of tension springs?1. The characteristics of the tension spring

​The heat treatment of the spring is to change the internal structure of the metal and alloy by heating, heat preservation and cooling of the spring to achieve the purpose of changing the mechanical, physical and chemical properties of the material.

​When the stainless steel spring is used for a period of time, or when the spring is just produced from the machine, oil stains will inevitably appear on the surface. If proper methods are not used when dealing with the oil stains, the oil stains will not be removed, but the spring will be damaged. So how do spring manufacturers remove oil from stainless steel springs?